Products Overview
|
TM A-6 Full –Automatic Blow molding machine (6 cavity)
|
Model |
Product name |
QTY/SET |
|
|
TM A-6 |
Main body |
1 |
|
|
|
TM A-6 |
Auto-loader machine |
1 |
||
|
1.0m³/30Bar |
High pressure air compressor |
4 |
||
|
2.1 m³/12Bar |
Low pressure air compressor |
1 |
||
|
3HP |
Water chiller |
1 |
||
|
3.0m³/30Bar |
Air cold dryer |
1 |
||
|
1.0 m³/30 Bar |
Air filter |
5 |
||
|
1.0m³/30Bar |
Air Tank |
1 |
||
|
6 cavity |
Bottle mould 500ML |
1 |
||
|
Output |
PET BOTTLE（100ML-2000ML） : 250ML-500ML ： 4500-5000 pcs/hr 1000ML ： 3800-4200 pcs/hr |
|||
MACHINE FEATURES:
1. Machine use of advanced PLC control system , stable in performance, automatic preform feeding .
2. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater
3. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
4. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
No contamination and low noise with the air cylinder to drive the action instead of the oil
pump.
6. Air route design is divide into two parts ,
7. Ideal effect of the chilling with the chilling system
8. Low rejection rate: less than 0.3percent
ITEM
UNIT
Machine
Clamping force
Kn
2000
Clamping stroke
mm
230
Stretching stroke
mm
370
Bottom stroke
mm
70
Number of cavities
Cavity
6
Container
Max. container volume
ltr
2.0L
Max Neck diameter
mm
50
Max .container diameter
mm
200
Max. container height
mm
330
Theoretical output
bph
4000-5000
Electrical System
Total power
KW
40
Heating power
KW
38
Power supply
380V/50HZ
Power consumption
KW/H
22(0.5L)
Air system
Operating pressure
Mpa
0.8
Low pressure consumption
L/min
1000（0.5L）
Blowing pressure
Mpa
3.0
High pressure consumption
L/min
2000（0.5L）
Machine size
Main machine(L×W×H)
cm
460*170*180
Preform auto-loader
cm
115*95*185
Machine weight
Kg
3000
All equipment and device are subject to change without prior notice
